Rib Eye Steaks

Category, CuisineDifficultyIntermediate
Yields1 Serving
Prep Time10 minsCook Time14 minsTotal Time25 mins

Restaurant quality rib eye steaks deserve restaurant quality cooking. This method will perfectly sear the outside of the steaks (with cross-hatch marks), and finish with roasting over indirect heat.

 4 rib eye steaks, each about 4cm thick
 Olive oil
 Sea salt
 Freshly ground black pepper
1

Prepare the barbecue for direct cooking over high heat (250°C to 290°C). For best results, have an indirect cooking zone set up on one area of your cooking grill for Step 6.

2

Lightly coat the steaks with olive oil and generously season with salt and pepper.

3

Brush the cooking grills clean. Open the lid and place the steaks on the cooking grill over direct high heat. Using the back of your tongs, gently press down on the steaks to ensure good contact with the grill. Close the lid and cook for 90 seconds.

4

Open the lid and rotate the steaks 90 degrees. Again, using the back of your tongs, gently press down on the steaks. Close the lid and cook for a further 90 seconds. Open the lid and turn the steaks over. Again, using the back of your tongs, gently press down on the steaks. Close the lid and cook for a further 90 seconds.

5

Open the lid and rotate the steaks 90 degrees. Again, using the back of your tongs, gently press down on the steaks. Close the lid and cook for a further 90 seconds. The steaks are now seared.

6

Move the steaks to an indirect area of the cooking grill to finish roasting through over indirect medium heat (190°C to 230°C), adjusting the temperature of your barbecue if needed. Roast the steaks over indirect medium heat for 10 minutes or until they are cooked to your liking. (If using a Weber Q barbecue, add a convection tray and trivet to the barbecue to create indirect heat)

7

Once the steaks have cooked, remove from the barbecue and leave to rest for 5 minutes before slicing.

Red Meat Doneness Temperatures:
8

Rare: 49°C

9

Medium Rare: 54°C

10

Medium: 60°C

11

Medium Well: 66°C

12

Well Done: 68°C

Ingredients

 4 rib eye steaks, each about 4cm thick
 Olive oil
 Sea salt
 Freshly ground black pepper

Directions

1

Prepare the barbecue for direct cooking over high heat (250°C to 290°C). For best results, have an indirect cooking zone set up on one area of your cooking grill for Step 6.

2

Lightly coat the steaks with olive oil and generously season with salt and pepper.

3

Brush the cooking grills clean. Open the lid and place the steaks on the cooking grill over direct high heat. Using the back of your tongs, gently press down on the steaks to ensure good contact with the grill. Close the lid and cook for 90 seconds.

4

Open the lid and rotate the steaks 90 degrees. Again, using the back of your tongs, gently press down on the steaks. Close the lid and cook for a further 90 seconds. Open the lid and turn the steaks over. Again, using the back of your tongs, gently press down on the steaks. Close the lid and cook for a further 90 seconds.

5

Open the lid and rotate the steaks 90 degrees. Again, using the back of your tongs, gently press down on the steaks. Close the lid and cook for a further 90 seconds. The steaks are now seared.

6

Move the steaks to an indirect area of the cooking grill to finish roasting through over indirect medium heat (190°C to 230°C), adjusting the temperature of your barbecue if needed. Roast the steaks over indirect medium heat for 10 minutes or until they are cooked to your liking. (If using a Weber Q barbecue, add a convection tray and trivet to the barbecue to create indirect heat)

7

Once the steaks have cooked, remove from the barbecue and leave to rest for 5 minutes before slicing.

Red Meat Doneness Temperatures:
8

Rare: 49°C

9

Medium Rare: 54°C

10

Medium: 60°C

11

Medium Well: 66°C

12

Well Done: 68°C

Rib Eye Steaks
cartmagnifiercross linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram